14MM REAMER WITH A POSITIVE STOP FOR 10MM X 70MM STEM

14MM REAMER WITH A POSITIVE STOP FOR 10MM X 70MM STEM
Genesis II - E0014737-1

An orthopaedic surgical instrument intended to resect bone (cut out part of the bone), and in some cases hypertrophic tissue [e.g., ligamentum flavum], to: 1) accept a prosthetic implant, typically at or within a joint (e.g., condyle of knee, neck of humerus, olecranon of ulna); and/or 2) relieve pressure at or facilitate access to a joint. Commonly called a mill or a reamer, it is typically designed as a stainless steel cylindrical body with an end/circumferential cutting edge and is attached to a shaft for manual or powered rotation. This is a reusable device.

No Data Available

No Data Available

Device Sterile: False

Sterilization Prior To Use: True

Sterilization Methods:

• Moist Heat or Steam Sterilization

Code: MBH

Device Name: Prosthesis, Knee, Patello/Femorotibial, Semi-Constrained, Uncemented, Porous, Coated, Polymer/Metal/Polymer

Device Class: 2

Physical State: N/A

Definition: N/A

Submission Type ID: 1

Review Panel: OR

Review Code: N/A

Technical Method: N

Gmp Exempt Flag: N/A

Life Sustain Support Flag: N

Unclassified Reason: N/A

Implant Flag: Y

Target Area: N/A

Regulation Number: 888.3565

Third Party Flag: N

Medical Specialty: OR

Device Id: 00885556650288

Device Type: Primary

DeviceId Issuing Agency: GS1

Contains DI Number: N/A

Package Quantity: N/A

Package Discontinue Date: N/A

Package Status: N/A

Package Type: N/A