Model 642 E
|
| Rotor: | Horizontal |
| Speed: | 3,380 RPM |
| Force: | 1,600 xg |
| Capacity: | 6 Place |
| Test Tube Sizes: | up to 17mm x 100mm |
Tube Holders Included
with Centrifuge
100mm 75mm
Operating Features
- PRECISE PERFORMANCE: Exact repeatability of the digital timer ensures that process runs are exact every time.
- DIGITAL TIMER: Single button operation; 'press and forget'; can be programmed from 1 to 30 minutes. Memory recall shows time set.
- BRUSHLESS MOTOR: For smooth and quiet operation with no routine maintenance.
- QUIET OPERATION with LOW VIBRATION:
- Double encased motor with Drucker's unique 'stability mount' assure quiet performance and low out-of-balance vibration.
- COOL RUNNING: Unique design of the motor housing and rotation chamber allows for cool operation even under the heaviest workloads.
Safety Features
- AUTOMATIC LID LOCKING: Centrifuge will not run with lid open; lid cannot be opened while samples are spinning.
- POSITIVE LID LATCHING: Firm mechanical latching of the lid prevents the escape of glass or debris if there is a breakage or an accident.
- INDICATOR LIGHTS: Control panel lights inform operator of machine status, (running, latched, unlocked)
ALL STEEL CONSTRUCTION: For strength and durability.
- CLEAR LID: Offers safe sample observation and optical calibration of speed.
Specifications
General Specifications for the Model 642 E Centrifuge
| Nominal Speed*: | 3,380 RPM | ||
| Nominal Force*: | 1,600 xg | ||
| Maximum Capacity Six-place: | 60 ml (6 x 15 ml) | ||
| Overall Dimensions: | |||
| Height: | 8.5 in. (22 cm) | ||
| Width: | 11 in. (28 cm) | ||
| Depth: | 12.5 in. (32 cm) | ||
| Weight: | 18.5 lbs. (8.4 kg) | ||
| Centrifuge Motor: | 1/30 HP PSC, AC | ||
| Protection Breaker: | 4 Amp. Re-settable | ||
| Timer: | Electronic: 1 to 30 min. | ||
| Max. Power Requirements: | 200 Watts | ||
| Voltage: | 120 Volts | ||
| Frequency: | 60 Hz |
* Given specifications are for the black test tube holders designed for 15ml tubes.
Accessories
RED 100mm Tube Holder (P/N: 7713031)
GREEN 75mm Tube Holder (P/N: 7713033)
1.0' Tube Cushion (P/N: 1525)
For spinning 100mm test tubes in the BLACK holder, 75mm test tubes in the RED holder, and 50mm test tubes in the GREEN holder.
0.25' Tube Cushion (P/N: 9150)
For use with the 1.0' tube cushion for unique test tube sizes.
Tube Holder Cap (P/N: 7713011)
Compatible with all tube holders.
